KisMAC is an open-source and free sniffer/scanner application for Mac OS X. USB devices with Intersil Prism2, Ralink rt2570 and rt73, and Realtek rtl8187. Apple AirPort and AirPort Extreme (dependent upon Apple's drivers); Lucent.
![](/uploads/1/2/6/6/126630059/320568600.png)
![Ralink Rt2570 Drivers For Mac Ralink Rt2570 Drivers For Mac](http://i.imgur.com/usCyMMF.png)
KisMAC is an open-source and free stumbler/scanner application for Mac OS X. It has an advantage over MacStumbler / iStumbler / NetStumbler in that it uses monitor mode and passive scanning.KisMAC supports several third party PCMCIA cards: Orinoco, PrismII, Cisco Aironet, Atheros and PrismGT. USB devices with Intersil Prism2, Ralink rt2570 and rt73, and Realtek rtl8187 chipsets are in progress towards full support as well.
I have an alfa awus036h, but I don't know how to install the driver on ubuntu 14.04.When the device is plugged and wireless switch is off. This is is the output of lsusb. Bus 001 Device 002: ID 8087:8000 Intel Corp.Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 002 Device 007: ID 0cf3:3004 Atheros Communications, Inc.Bus 002 Device 004: ID 174f:14b2 SyntekBus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader ControllerBus 002 Device 015: ID 148f:3070 Ralink Technology, Corp. I have a device that uses the same driver, just labelled ralink USB Wifi Dongle. This is what I did to get mine to work:UPDATE: You may have to download kernel headers, if you don't have them already:sudo apt-get install linux-headers-$(uname -r)Plug the dongle in, and run the following lines in a terminal: git clone mt7601/srcmakesudo make installsudo mkdir -p /etc/Wireless/RT2870STA/sudo cp RT2870STA.dat /etc/Wireless/RT2870STA/sudo modprobe mt7601UstaAfterwards, it picks up in the GUI network tool. A reboot may be required.Hope that helps.
![](/uploads/1/2/6/6/126630059/320568600.png)